Yeah man. Cmon guys. Tail pads for guns? Nooooooo
REMINDER: THE ARENA PLATFORM, INC. has no obligation to monitor the Forums. However, THE ARENA PLATFORM, INC. reserves the right to review any materials submitted to or posted on the Forums, and remove, delete, redact or otherwise modify such materials, in its sole discretion and for any reason whatsoever, at any time and from time to time, without notice or further obligation to you. THE ARENA PLATFORM, INC. has no obligation to display or post any materials provided by you. THE ARENA PLATFORM, INC. reserves the right to disclose, at any time and from time to time, any information or materials that we deem necessary or appropriate to satisfy any applicable law, regulation, contract obligation, legal or dispute process or government request. Click on the following hyperlinks to further read the applicable Privacy Policy and Terms of Use.
Yeah man. Cmon guys. Tail pads for guns? Nooooooo
Ehhh you could make at least two copies of the mini-padillac I just ordered out of Nate Nate's gun lol. Also, big-huev surfborting legend Pete Mel seems to be a champion of the gun tail/deck pad:Yeah man. Cmon guys. Tail pads for guns? Nooooooo
think those are collectors items now that he started Veia with JJFinally, we could just do as The Man does, stop being so fancy pinky-in-the-air and use The Man's trac pad:
http://instagr.am/p/COBBlk-jhAn/
Nice.dude in Portugal ripping on a full size Padillac-
https://www.instagram.com/reel/Cxiv8rwqdsO/?igshid=MzRlODBiNWFlZA==
Not sure i like the mini padi for slopey.for those with Mini Padis - if I were trying to tune a custom one for big but slopey Southern California wintertime waves with lots of water moving, would you increase width or thickness at stock sizes or both?
Or... go wider on a custom (regular) padillac.Not sure i like the mini padi for slopey.
it seems tuned for more curve in the face (pulled, foiled tail, rocker etc).
Personal preference of course but I would think of other choices for those conditions.
But if you were customizing I would probably go thicker not wider.
Pyzel has said (somewhere here I think) that roundtail is offered.Anyone tried custom ordering a mini Padillac with a round tail?
I have a 6'2 ghost and a 6'7 MP. Transition between boards feels really seamless, not sure what that says about the rocker. If you order the same width and thickness I'd guess MP is more bladed out in the tail and has thinner rails, but more beef under the chest.For those of you that have surfed/own both, how does the Mini Padi rocker compare to the Ghost? Having a good look at a 7'0 Tank the other day at the points made me think of the differences between Ghost (Pro), Tank and Mini Padi.
Jon @Pyzelsurfboards if you should read this, I'm particularly curious about the comparison between a longer Ghost and Mini Padi, say ~7'0. Would aim for ~20" width, so either Ghost Pro or a slimmer MP. Board would be for powerful, but not super hollow, waves like this:
Custom order anything you want! Our team have just been stoked on the swallow tails, but round tails have always worked great too.Anyone tried custom ordering a mini Padillac with a round tail? Know they are probably only offered in swallows for a reason (both performance and maybe to distinguish from a Ghost) but that narrow swallow looks like it would be a little limiting if the wave gave you a little face to play with rather than just gunning for the barrel.
that is sick! I always ride much smaller fins then my normal quads in my MP. I even use some JJF Smalls for fronts and then a 4'' upright set of trailers. Makes the boards work much as you describe!I just realized that I still owe a short ride report on mine. I'm 6'2 about 195, MP is 6'7 x 20 x 2 7/8. Waited forever to take it for its maiden voyage....The first two or three sessions were a bit underwhelming to be honest. The board felt a bit stiff and slow. Surfed it with dhd m thruster, then dhd m quad. I figured that I might have bitten off more than I can chew and just don't surf the waves that do the board justice. Then I changed the dhd quad rears for reactor quad rears and gave it another go. Kinda mind blowing how different the board felt. The paddle power and confidence on late takeoffs was always there, but now the board feels way more nimble and agile; it's easier to work with flatter sections of the wave too. I probably did some of the biggest, most powerful carves of my life. Stoked. Have yet to get barreled on it though, was mostly surfing it in powerful, but not exactly hollow points.
That looks fun!!For those of you that have surfed/own both, how does the Mini Padi rocker compare to the Ghost? Having a good look at a 7'0 Tank the other day at the points made me think of the differences between Ghost (Pro), Tank and Mini Padi.
Jon @Pyzelsurfboards if you should read this, I'm particularly curious about the comparison between a longer Ghost and Mini Padi, say ~7'0. Would aim for ~20" width, so either Ghost Pro or a slimmer MP. Board would be for powerful, but not super hollow, waves like this:
Really cool for you to chime in here and on this design forum in general.That looks fun!!
The most basic differences between Ghost and MP
MP has bit less tail rocker and a fair bit more entry rocker (even though the beak makes it look flatter)
MP has narrower back 1/2 and a tiny bit wider nose .
both have similar bottom contours.
Overall I would just say that the MP feels a bit more "gunny" than the Ghost at same size.
Haha! You guys and your fin questions!!! There is no concise answer to that since everyone is different size/weight/ability/tastes. It's like asking what is the best kind of ice cream! If there is one bit of advice I could give it is ride smaller fins than you would in a smaller wave quad, since you will most likely be in bigger, faster waves and you want the boards to be loose, not tightReally cool for you to chime in here and on this design forum in general.
Even if it's not really u, but chatGPT or whatever it's still making lots of sense!
"Magic 8 ball... which fins should I use in my mini padillac???"...
Feels like that sometimes to us civilians lost in the weeds....
Thanks for the clarification and guidance!