Head of the grub screw stripped. Tried the super glue method to no avail. Has that ever worked? Anyhow, what's the next step? Try to drill it with a small bit or get some kind of screw extractor?
REMINDER: THE ARENA PLATFORM, INC. has no obligation to monitor the Forums. However, THE ARENA PLATFORM, INC. reserves the right to review any materials submitted to or posted on the Forums, and remove, delete, redact or otherwise modify such materials, in its sole discretion and for any reason whatsoever, at any time and from time to time, without notice or further obligation to you. THE ARENA PLATFORM, INC. has no obligation to display or post any materials provided by you. THE ARENA PLATFORM, INC. reserves the right to disclose, at any time and from time to time, any information or materials that we deem necessary or appropriate to satisfy any applicable law, regulation, contract obligation, legal or dispute process or government request. Click on the following hyperlinks to further read the applicable Privacy Policy and Terms of Use.
Screw head stripped not the box.The head of the screw stripped or the threading in the box?
The threads stripped on my future box once. Tried a bunch of methods like heating the plastic and JB weld. None worked. Bought a grub screw the next size up and forcefully put it in which threaded the plastic in the process. That worked. Still holding a year later.
Leverage is your friend get a long handle allen keyTry the glue method again, if you can. I believe the size is 5/32" hex. Get a real allen key in that size from Home Depot or Lowe's so you have some leverage. Something like this: https://www.homedepot.com/p/Klein-Tools-5-32-in-Hex-Journeyman-9-in-T-Handle-JTH9E10/206377504
If that doesn't work, you'll probably have to do some kind of drilling scenario, which is a nightmare.
I’ve got that. I will try the evil Norwegian Genius’s suggestion to use a stronger adhesive as well.Leverage is your friend get a long handle allen key
I would say if no go with super glue and long handle then next step is drilling out grub screw carefully.I’ve got that. I will try the evil Norwegian Genius’s suggestion to use a stronger adhesive as well.
If it can hold a cracked engine block at pressure...it can do ANYTHINGUse JB weld. Careful not to get it on anything else.
JB WELD will do it.
I have even used it to patch holes in my surfboard in a pinch.If it can hold a cracked engine block at pressure...it can do ANYTHING
It worked for a broken hinge on a door for a pretty good time frame with heavy traffic. Two kinds sold in tube: one with metal.and epoxy and other just epoxy. The epoxy one works great for ding repair while on vacation or in a pinch. Much better then suncure because only one step no sandiing if you form it right and smooth and remove extra before it dries.If it can hold a cracked engine block at pressure...it can do ANYTHING
So is it out?Ended up getting a #8/#10 screw extractor from Home Depot. Drilled the grub screw a little with a 3/32 bit until the extractor could get deep enough to grab the Screw. I’d use this as a last resort because of the risk of damaging the box from drilling the screw. I would have used a little smaller bit, but my drill would not hold anything smaller. Never tried JB Weld or anything else to glue the hex wrench in.
Your avatar is freaking me out.extractor worked for me easily.