Second try

[lob]

My second try.
Was much faster to "create" than the first one.
I spent 4 hours instead of 8 !!! <img border="0" title="" alt="[Eek!]" src="images/icons/shocked.gif" />
I still have a few things to fix on it.
It should be a 6'8" x 19" x 2"1/2.

<img src="http://www.momentoffame.com/snapshots/MomentOfFame/l69756.jpg" alt=" - " />

<img src="http://www.momentoffame.com/snapshots/MomentOfFame/l69757.jpg" alt=" - " />

<img src="http://www.momentoffame.com/snapshots/MomentOfFame/l69752.jpg" alt=" - " />

<img src="http://www.momentoffame.com/snapshots/MomentOfFame/l69755.jpg" alt=" - " />

<img src="http://www.momentoffame.com/snapshots/MomentOfFame/l69753.jpg" alt=" - " />

<img src="http://www.momentoffame.com/snapshots/MomentOfFame/l69754.jpg" alt=" - " />

 

[dk]

nice! gonna be a single? for only ur second your outline looks very straight. great shots to..black and white is killer

 

[Shwuz]

Nice! That thing is just screaming, "Ride me! Rip one up!"

Great second try, I'd say.

 

[LeeD]

Hey
Excellent shape!
I wish I had your templates when I was shaping.
Good stuff!

 

[lob]

Leed, dk, schwuz: thanks a lot <img border="0" title="" alt="[Wink]" src="images/icons/wink.gif" />
It's gonna be a tri fin.
The central fin in a box will come with two smaller side fins in fcs plugs. I think I'm gonna put two plugs each side so I can move the side fins position or take them off and ride the board as a single.
About the templates, here is what they are like:
the dotted line shows the template of my first try. Remember first try

<img src="http://www.momentoffame.com/snapshots/MomentOfFame/l69191.jpg" alt=" - " />

<img src="http://www.momentoffame.com/snapshots/MomentOfFame/l69192.jpg" alt=" - " />

I drew them on Autocad and then cut them in "isorel" (the name of the half wood half cardboard material).
I chosed to cut half templates so that I can move them back and forth or side to side and shape shorther, longer, narrower or larger board. I could also mix them with other templates.

By the way if any of you wants the autocad file, no worries, just ask. <img border="0" title="" alt="[Wink]" src="images/icons/wink.gif" />

[ February 07, 2004, 11:12 PM: Message edited by: lob ]

 

[lob]

Shwuz, Santa Claus sent you an e-mail. <img border="0" title="" alt="[Wink]" src="images/icons/wink.gif" />

 

[Shwuz]

Yes indeed! I drew it up and cut it out today, and laid it down with my other templates for a "family photo". See my "Gonna go for it!" thread for the picture.

Thanks a ton, lob, the numbers you sent were great, and it looks just as slick as ****. Now if I can only shape foam as well as I shaped masonite. <img border="0" title="" alt="[Smile]" src="images/icons/smile.gif" />