I snapped my board about 18 inches down from the nose. I originally bucked it but I *had* to ride it in the epic conditions we had and it broke. It also tore the glass in a strip abour 6 inches wide but 4 feet long. I went to a shop and got glass, resin and catalyst so I am set on that. I got some adhesive that should work for foam and wood too (it says foam and wood on the can <img src="/forum/images/graemlins/foreheadslap.gif" alt="" />) My question is this - How the hell do I lay the glass and resin to make it look good over the part where the glass delaminated all the way down? JJR or anyone else who has done this before, I could definitely use the help, it could just get you a set wave at C------ C---------- some time. <img src="/forum/images/graemlins/grin.gif" alt="" />