6'3" Bonzer E-wing fish

GWS

Duke status
Jan 11, 2002
42,605
21
0
done
The very first one. Numero uno. The prototype. Orange with some pinliner pinlines done in a fish pattern on the deck. The deck has been crushed down hard where I put my feet, but once it was crushed down, the deck was reinforced with some six ounce. Orange spray. Glass on side fins with a FU box in the center. One ding in the bottom which has been fixed. Nose is 15.5 tail is 16" and width is 21.5 while thickness is 3. Needs at LEAST 195 pound surfer. Could go as high as 220 on a guy that can surf.

200 bucks with no center fin. PM me if interested. I'll try and get some pictures up in the next day or so.
 

Kalani..

Michael Peterson status
Nov 28, 2003
2,103
0
0
Check your PM. <img src="/forum/images/graemlins/grin.gif" alt="" />
 

Waldo

Duke status
Jan 24, 2002
16,025
42
48
Shangri-La
Will you cut a combo deal with a hoodlamb?
I could be really interested in that board, and have no problem with driving up there to get it. Been a while since I've seen a pic of that one though, so it'd be great if you can post something. And what's the glassing &amp; weight like on that board?
 

GWS

Duke status
Jan 11, 2002
42,605
21
0
done
I can't take a loss on the hoodlambs, but yeah, I could make you a great deal on one as part of a package.

If I remember right, the board was glassed 6/4 on the deck and 4 on the bottom with a patch over the fins. S cloth. Plus, after I crushed the deck in with my feet, the foot wells were reinforced with a couple of layers of 4. The board is not a super light weight.

The deck is all hard, no delams. I can't guarantee against that happening though. Especially if you leave it in a hot car.

I'll try and get some current pictures up this next week.