For instance, how ...Lost describes the Driver working off the back foot or Xanadu's Family 1 of rockers.
This provides considerable insight IMHO.
This provides considerable insight IMHO.
REMINDER: THE ARENA PLATFORM, INC. has no obligation to monitor the Forums. However, THE ARENA PLATFORM, INC. reserves the right to review any materials submitted to or posted on the Forums, and remove, delete, redact or otherwise modify such materials, in its sole discretion and for any reason whatsoever, at any time and from time to time, without notice or further obligation to you. THE ARENA PLATFORM, INC. has no obligation to display or post any materials provided by you. THE ARENA PLATFORM, INC. reserves the right to disclose, at any time and from time to time, any information or materials that we deem necessary or appropriate to satisfy any applicable law, regulation, contract obligation, legal or dispute process or government request. Click on the following hyperlinks to further read the applicable Privacy Policy and Terms of Use.
The center going from single to double with Vee out the back and how that distorts the center rocker - what Does It Matter ;-)For instance, how ...Lost describes the Driver working off the back foot or Xanadu's Family 1 of rockers.
This provides considerable insight IMHO.
It matters because concave can change the rocker, right?The center going from single to double with Vee out the back and how that distorts the center rocker - what Does It Matter ;-)
Nah brahAre you saying moderate curve isn’t cutting it for you, brah?
I am pointing out that the requested description is only part of the Rocker of a board .The Tokoro 4VC and Kerry Tokoro’s M7 both have single to double to vee. I’ve ridden that bottom on many boards for NS and big town for many years. Pintails most of them. All of them were great to magic boards.
Josh Moniz won the Volcom Pipe Pro a couple years ago on a Kerry M7. And the Tokoro 4VC was won a lot of Triple Crown events and clinched the world title at Pipe for Medina, Mick, Sunny, Occy. Some those guys may not have won the Masters but won enough heats to clinch. Andy won Pipe and Tahiti on a 4VC.
I have faith in that bottom and many top pros do too.
Fair enough. I was going to add that the success of Wade and Kerry’s design is a combination of outline, fin placement, nose rocker, tail rocker and years of R & D.I am pointing out that the requested description is only part of the Rocker of a board .
Its a combination that few will try to explain what it does in detail .
no it doesn't. Once you understand this, you can stop shaping only flat bottoms.The center going from single to double with Vee out the back and how that distorts the center rocker - what Does It Matter ;-)
No, concave doesn't change the rocker. The rocker is set to whatever the shaper designs, and then shapes the rest of the board accordingly. Stringer rocker comes first and is the benchmark that all else followsIt matters because concave can change the rocker, right?
As for my original question, why do you think this is?
Don't shapers add the concave last?No, concave doesn't change the rocker. The rocker is set to whatever the shaper designs, and then shapes the rest of the board accordingly. Stringer rocker comes first and is the benchmark that all else follows
great explanation...Rocker is the arc of a given radius. It can be measured this way.
Example. A rocker with a radius of 28 feet will turn a certain way. A rocker with a radius of 40 feet will be flatter.
Continuous rocker is when the curve keeps the same radius from tail to nose flip.
Staged rocker is the blending of several radii. An example would be a 20 foot radius in the tail, blending to a 30 foot radius in the middle up to the nose flip.
Graduated rocker would be where the radius changes the length of the board. An example of this is the C.I. MBM model, where the tail is the flattest and as it moves from the tail, the rocker is continually getting more curved.
Bottom contours do not affect stringer rocker. The rocker is set to the design, and the rails are raised or lowered. An example would be concave, where the stringer rocker is set to the design, and less foam is removed at the rails.
It is a mistake to think of concave as removing more foam along the stringer, but instead the shaper thinks of concave as removing less foam along the tail. (This is from the shaper 's view of the board belly-up in the stands).
Generally yes, a shaper starts at the rails, and works to the stringer. A good shaper has the complete design in his head before he picks up the planer.Don't shapers add the concave last?