Resin work needed-encase a fin

20W-50 and blood

Duke status
Feb 4, 2004
25,116
4,278
113
SOCAL
Visit site
looking for someone with resin skils. Need a seven inch fin encased in a clear resin panel (maybe double the thickness of the fin or so), polished to clear see-through gloss on front side and backside. this is to show off a fin with sentimental value, not an art piece. if you know of anyone, please shoot me a PM
 

sdsurfrat

Michael Peterson status
Jun 2, 2008
2,788
1,029
113
looking for someone with resin skils. Need a seven inch fin encased in a clear resin panel (maybe double the thickness of the fin or so), polished to clear see-through gloss on front side and backside. this is to show off a fin with sentimental value, not an art piece. if you know of anyone, please shoot me a PM
El Hefe, i would use 5 minute epoxy for a project like that. Works a treat. Otherwise buy needforspeed a 12 pack of choice IPA.
 

jtourito

Nep status
Jul 29, 2024
813
748
93
Land Of Adult Learners
looking for someone with resin skils. Need a seven inch fin encased in a clear resin panel (maybe double the thickness of the fin or so), polished to clear see-through gloss on front side and backside. this is to show off a fin with sentimental value, not an art piece. if you know of anyone, please shoot me a PM
@20W-50 and blood you want to show it off correct and hang it on wall inside:shrug: Why not install hanger on back if you want to only show off one side could add spacer maybe 1/2" thick to allow light to see other side or install hanger to top "tab side" and cord hung from ceiling. Or maybe on shelve you could use wood block cut channel in it for tabs and use grub screws and display.
images.jpg
 
Last edited: