REMINDER: THE ARENA PLATFORM, INC. has no obligation to monitor the Forums. However, THE ARENA PLATFORM, INC. reserves the right to review any materials submitted to or posted on the Forums, and remove, delete, redact or otherwise modify such materials, in its sole discretion and for any reason whatsoever, at any time and from time to time, without notice or further obligation to you. THE ARENA PLATFORM, INC. has no obligation to display or post any materials provided by you. THE ARENA PLATFORM, INC. reserves the right to disclose, at any time and from time to time, any information or materials that we deem necessary or appropriate to satisfy any applicable law, regulation, contract obligation, legal or dispute process or government request. Click on the following hyperlinks to further read the applicable Privacy Policy and Terms of Use.

Sidebar Sidebar

Search results

  1. need 4 speed

    Twinzer Feedback?

    This is a soft diamond tail inspired by @ghostshaper Jobson I'll go into all the gory details later The glasser doesn't drink ;) and he'll do whatever I tell him.
  2. need 4 speed

    Twinzer Feedback?

    vroom vroom
  3. need 4 speed

    Panda twinzer fin set -pics added

    buy them... you need them
  4. need 4 speed

    Edge Boards (Andreini/Greenough)

    Call them what you will. I thought they were closer to tri-plane. My own knock off
  5. need 4 speed

    Twinzer Feedback?

    :shaka: this is the way
  6. need 4 speed

    Twinzer Feedback?

    I made a plug to fit in my Fusion jig, blanking off one side. For me it's esthetics, I like the look of a single plug. I make canards with the tab/tang in different position to adjust the canard
  7. need 4 speed

    Edge Boards (Andreini/Greenough)

    I may have mentioned this before,but when I spoke with Mike Wallace (@surf_iconoclast on IG)about edge boards and Ellis at the Boardroom, he told me edge boards are very trackie using multi-fin and theorized that these boards evolved due to this. Ellis obviously makes more traditional single fin...
  8. need 4 speed

    Twinzer Feedback?

    It's was Charles' originally (@Dudebro's when I got a hold of it) I made my own version of it. Kind of a quad fishy outline, bevel rail, double concave nose to tail (iirc) I don't know if it came with those weird fin sets or not. I'd have to look but I think they were set @8 3/8" and closer to...
  9. need 4 speed

    Twinzer Feedback?

    @Bluehorn imo you are on the right track. I set fins on a 6-2 old man HPSB at 6 3/4" I use a Griffin template scaled up to 5 3/8"H x 5 1/8"B this achieves a more drivey thruster like feel, only faster and without the need to pump as much for speed. On a my 6-5 at set at 7" and my 6-8 at 7 1/2"
  10. need 4 speed

    Twinzer Feedback?

    As spoken about by @ghostshaper there is a lot of load on the canards, the half Fusions (shout to Barry) a far less prone to cracking imo
  11. need 4 speed

    Twinzer Feedback?

    I also experimented traditional slots, channels and concaves. For me, even thou aesthetically I prefer the traditional Jobson slot out the tail I stopped doing them to simplify construction as I didn't feel enough of a difference to warrant the additional work required
  12. need 4 speed

    Twinzer Feedback?

    I have ridden twinzers exclusively from the last 7 years. During my early exploration I experimented with fin size and placement to achieve a desired feel, this was the driver in to fin making. Ultimately I ended up making my own boards using shape3d to control all the variables. Some riders are...
  13. need 4 speed

    Twinzer Feedback?

    For your first I would line up the leading edge of main with trailing edge of canard. Roughly 1 1/8” gap/slot between. I like 9* of cant but you can match if you like
  14. need 4 speed

    Twinzer Feedback?

    Just noticing More than one way to skin a cat
  15. need 4 speed

    California Lemon Law?

    The milage doesn't matter that much
  16. need 4 speed

    Twinzer Feedback?

    Not much cant on those canards
  17. need 4 speed

    Gen Zers are getting fired at shocking levels

    Boomer spank bank
  18. need 4 speed

    .

    You want a DK Swordfish
  19. need 4 speed

    Leash Plugs - Regular vs. Goofy

    If the plug is in the center would the board come back to you a little "straighter" for what it's intended purpose ? left as right is about as senseless as a traction pad causing drag
  20. need 4 speed

    *** Official Fin Thread ***

    @claw87 When you repair them it's pretty easy to see what's happening. There are different densities of foam, to keep boards light. There are trade offs of this. I'm guilty of using light foam and delt this the consequences.I just got a 2# eps from Millennium and was shocked by how much more...

Share this page

Share this page
Top Bottom