REMINDER: THE ARENA PLATFORM, INC. has no obligation to monitor the Forums. However, THE ARENA PLATFORM, INC. reserves the right to review any materials submitted to or posted on the Forums, and remove, delete, redact or otherwise modify such materials, in its sole discretion and for any reason whatsoever, at any time and from time to time, without notice or further obligation to you. THE ARENA PLATFORM, INC. has no obligation to display or post any materials provided by you. THE ARENA PLATFORM, INC. reserves the right to disclose, at any time and from time to time, any information or materials that we deem necessary or appropriate to satisfy any applicable law, regulation, contract obligation, legal or dispute process or government request. Click on the following hyperlinks to further read the applicable Privacy Policy and Terms of Use.
What’s ur job gws?Looks good. Cut 12 Bonzers this AM. More to go. If you're in need it can be made to happen.
Here's Mikey surfing an oversized RS model.
http://instagr.am/p/CAUtRuQpEyB/
I cut boards and design board files.What’s ur job gws?
The MBLV is a favorite of mine. Very fun little board. Smaller wave bias than the Egg, IMO. The nose rocker on the Egg is more gradual than the MBLV. The Egg is actually super versatile. I've had a number of eggs in that size range and they've all been winners. Malcolm has that design super dialed in. Very refined. The BB is probably biased a little to better wave side of the Egg. Speaking of which, I do like to add a scooch of tail width to my small eggs.Considering my next bonzer for Santa Cruz points and occasional beaches. I like foam. Can those who know compare the performance of MBLV, Bumblebee, and a shorter egg? Thinking of something in the 5’10 to 6’2 range.
GWS have you ever gone twin with or with out AO bottom.on MC egg?The MBLV is a favorite of mine. Very fun little board. Smaller wave bias than the Egg, IMO. The nose rocker on the Egg is more gradual than the MBLV. The Egg is actually super versatile. I've had a number of eggs in that size range and they've all been winners. Malcolm has that design super dialed in. Very refined. The BB is probably biased a little to better wave side of the Egg. Speaking of which, I do like to add a scooch of tail width to my small eggs.
Ha! Just yesterday I asked Malcolm if he had made an Egg with an A/O fin setup. He hasn't. He's done the MBLV as a twin which I thought was pretty interesting. Supposedly it worked well. I have a new Russ Short that I widened the tail on, put a swallow on that and then glassed on keel fins. Stock Bonzer bottom. The keels had an inside foil on them and they felt like they were dragging, so knocked those off and put futures in. The fin position was a compromise between AO placement and keel fin placement. Anyway, I ran out of steam and the thing hasn't been back in the water yet. Time will tell...GWS have you ever gone twin with or with out AO bottom.on MC egg?
Did MC have any positive/negative feedback of idea of egg with AO set up?Ha! Just yesterday I asked Malcolm if he had made an Egg with an A/O fin setup. He hasn't. He's done the MBLV as a twin which I thought was pretty interesting. Supposedly it worked well. I have a new Russ Short that I widened the tail on, put a swallow on that and then glassed on keel fins. Stock Bonzer bottom. The keels had an inside foil on them and they felt like they were dragging, so knocked those off and put futures in. The fin position was a compromise between AO placement and keel fin placement. Anyway, I ran out of steam and the thing hasn't been back in the water yet. Time will tell...
Is MC in full production right now taking orders?He's not opposed to it.
I think it sounds like a cool project.
My buddy has a big guy egg ao mash up with e wing.He loves it says its loose but doesnt slide out and rides it in big point surf.Did MC have any positive/negative feedback of idea of egg with AO set up?
What dims u order?Malcolm is working on an EPS Octafish for 'ol Fresno this week...i'm told.
I cut a 65R in EPS yesterday, but I don't remember what I cut out of it.Malcolm is working on an EPS Octafish for 'ol Fresno this week...i'm told.
Sounds like a 6' +\- Egg to me.Thanks for the reply GWS! I used to be 100% a longboarder but am moving down in length. Right now I have a 6'8 Russ Short and a mini-simmons - I want something that fits in between the two - can still handle more size than the mini-simmons but more compact than the Russ.
MBLV is a solid all rounder with a better bottom end than an egg. They surf nice and free with the three fin configuration. Nice 70's feel to these boards. I have a 5'6. My egg is 5'9 and really thinned out with performance rails. Surfs really quick down the line and the longer rail keeps the turns more drawn out than the mlv. The five fin setup gives you great hold in larger waves, especially during the highline. You can't go wrong really. Because you've come off long boards and have a russ short, the egg will fit seamlessly into your quiver. That said, if you want something different that will flow like your mini sim - the MLV is the go.Considering my next bonzer for Santa Cruz points and occasional beaches. I like foam. Can those who know compare the performance of MBLV, Bumblebee, and a shorter egg? Thinking of something in the 5’10 to 6’2 range.